Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Testing and Inspection

1. Disconnect the Ignition Control Module connector.
2. Measure the resistance between the following terminals in the harness side of the Ignition Control Module plug connector.
Measure between harness terminal 5 (DL) and 6 (GY).

Specification: 2580-2700 Ohms

3. If not within specifications;
- Check harness between Ignition Control Module and Crankshaft Position Sensor.
- If wiring is OK replace Crankshaft Position Sensor.