Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> MX-3 L4-1598cc 1.6L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Transmission Position Sensor/Switch >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Adjustments

NOTE: Obtain audio anti-theft access code before disconnecting battery cables.

1. Disconnect the negative battery cable.
2. Remove the resonance duct and the air cleaner housing assembly.
3. Remove the spring pin and clip; and disconnect the selector cable.
4. Rotate the manual shaft to the N position.
5. Disconnect the park/neutral switch connector.
6. Loosen the park/neutral switch mounting bolts.


View: Checking Continuity Between Terminals A & H:





7. Connect an ohmmeter between terminals A and H.
8. Adjust the switch to the point where there is continuity between the terminals.
9. Tighten the park/neutral switch mounting bolts.

Tightening torque: 7.9 - 10.7 Nm (69.5 - 95.4 in.lb.)

10. Verify that the selector lever range position and park/neutral switch are aligned.
11. Connect the park/neutral switch connector.
12. Connect the selector cable and install spring pin and clip.
13. Install the air cleaner housing assembly and the resonance duct.


pro multis · About Operation CHARM