With Manual Transaxle (MTX)

SYSTEM OPERATION
1. Warm up the engine to normal operating temperature.
2. Shift the selector lever to Neutral position.
3. Turn all electric loads OFF.

View: Test Connections:

4. Connect a tachometer to the data link connector terminal IG- as shown.
5. Verify that the cooling fan is OFF.
6. Check the idle speed is within specification.

Idle speed (in Neutral): 640 to 700 rpm

7. If not within specification range, adjust the idle speed.

Fig.3 Engine Load/ RPM Specifications:

8. Verify the idle speed is within specifications under the conditions in Fig.3
9. If not as specified, check the related wiring harness, switches and sensors.