Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> Protege L4-1839cc 1.8L SOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Testing and Inspection >> Scan Tool Testing and Procedures >> Inspection Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Inspection Procedure

INSPECTION PROCEDURE






Note: Do not connect the EC-AT Tester and the system selector to the data link connector when the engine signal monitor or another EC-AT Tester is connected to the powertrain control module (transaxle). Doing so can cause incorrect test results.

1. Disconnect the powertrain control module (transaxle) connectors.






2. Assemble the SST. (Refer to above.)






3. Set the EC-AT Selector switch to position 3.
4. Set the EC-AT Tester vehicle switch to 323 position.
5. Set the EC-AT Tester select switch to position A.
6. Turn the ignition switch and the EC-AT Tester main switch ON.
7. Verify indication of the respective light or digital display in each condition, referring to the Light and Digital Display Table.
pro multis · About Operation CHARM