Automatic Trans.

REMOVAL/INSPECTION/INSTALLATION
1. Remove in the order shown in the figure, referring to Removal note.
2. Inspect the intake air system components and repair or replace them as necessary.
3. Install in the reverse order of removal, referring to Installation note.




1. Fresh air duct
Inspect for damage
2. Air cleaner
Inspect for excessive dirt and damage
3. Air cleaner element
Inspection
4. Mass air flow sensor
Inspection
5. Air hose
Inspect for damage
6. Resonance chamber
Inspect for damage Installation note
7. Accelerator cable
Inspection/Adjustment
8. Throttle body
Inspection
9. BAG valve
Inspection
10. [1][2]Intake manifold bracket
11. [1][2]Intake manifold
Removal note

[1][2]Intake Manifold Removal Note




1. Tighten the bolts in the order shown in the figure.

Tightening torque: 19-25 N.m (14-18 ft-lb)

2. Refill the radiator with the specified engine coolant.
3. Check for engine coolant leakage.

Resonance Chamber Installation Note




1. Slide the hose clamp onto the hose and push it onto resonance chamber.




2. Rotate the hose and hook it securely onto the locating knob.




3. Tighten the hose clamp.