With Disc Brakes

DISASSEMBLY
^ Disassemble in the order shown in the illustration, referring to the following notes:

CAUTION: The wheel hub and bearing are one assembly and do not need to be disassembled.

ABS Sensor Rotor
NOTE: The ABS sensor rotor does not have to be removed unless you are replacing it.





^ Remove the ABS sensor rotor by using a chisel.

Hub Bolt
NOTE: The wheel hub and bearing are one assembly and do not to be disassembled.





^ Remove the hub bolts by using a press.

ASSEMBLY
^ Assemble in the reverse order of disassembly, referring to the following notes:





Hub Bolt
^ Press in new hub bolts.





ABS Sensor Rotor
1. Install a new rear ABS sensor rotor on to the wheel hub.
2. Using a steel plate and the Special Service Tool (SST), press the rotor until it is flush with the wheel hub.

NOTE: The ABS sensor rotor can be installed in either direction.