Spark Plug: Service and Repair

Removal / Installation





1. Remove and install the high-tension leads carefully.

CAUTION:
^ Pulling on the wire part of the spark plug lead may break it. To remove the lead, pull only on the boot.





2. Remove and install the spark plug with a plug socket.

CAUTION:
^ To avoid breaking the spark plug, be sure to tit the socket squarely over it.

3. Apply anti-seize compound or molybdenum-based lubricant to the spark plug threads.
4. Tighten the spark plug to the specified torque.

Tightening torque:
15-22 N.m {1.5-2.3 kgf.m, 11-16 ft.lbf}