Flow Chart No 2, Diagnostic Trouble Code 3

Possible Cause
^ Weak battery
^ Open or short circuit in wiring harness
^ Poor connection of connector

Diagnostic Trouble Code 3:

Step 1
Measure the battery voltage.

Step 2

WARNING: Handling the SAS unit improperly can accidently deploy the air bags, which may seriously injure you. Read SERVICE WARNINGS, before handling the SAS unit.

1. Carry out the "Before Servicing" procedure.
2. Disconnect the SAS unit connector.

Diagnostic Trouble Code 3:

3. Connect the negative battery cable.
4. Turn the ignition switch to ON.

Diagnostic Trouble Code 3:

5. Measure the voltage at the terminals of the SAS unit connector.