New Generation Star (NGS) Tester Hook-Up Procedure

NEW GENERATION STAR TESTER HOOK-UP PROCEDURE

CAUTION: Make sure key is off.




1. Insert the vehicle interface module and program card into the New Generation Star (NGS) tester.




2. Plug the NGS OBD II adapter into the interface module and the connector into the vehicle Data Link Connector (DLC) located under the dash left side of the steering shaft.




3. Plug the NGS tester power cable into the NGS OBD II adapter power cable connector, cigarette lighter or use a battery hook-up adapter.
4. Listen for a double beep. The NGS tester is now initialized. Begin the functional test of powertrain control system.