Alignment

TIGHTENING SPECIFICATIONS:
Caster Split Nuts 149 - 201 Nm (110 - 148 ft. lbs.)

ALIGNMENT SPECIFICATIONS:
Caster [1]:
Left Side 4.1° ± 1.0°
Right Side 4.5° ± 1.0°
Total/Split -0.4° ± 0.7°
Camber:
Left Side -0.5° ± 0.7°
Right Side -0.5° ± 0.7°
Total/Split 0.0° ± 0.7°
Toe Total/Split [2] 0.06° ± 0.25°
Wheel Track 30.6 mm (1.2 inch)
Dog-Tracking [3] 30 mm (1.18 inch)
Clear Vision [4] 2.4° ± 3.0°
Ride Height:
Front (Original Parts) 97 mm ± 11 mm (3.8 inch ± 0.4 inch)
Front (Replacement Parts) 97 mm ± 3 mm (3.8 inch ± 0.1 inch)
Rear 178 - 227 mm (7 - 9 inch)
Vehicle Lean (Side-to-Side Height Differences):
Front Wheel Opening Maximum 16 mm (0.6 inch)
Rear Wheel Opening Maximum 20 mm (0.78 inch)

[1]: 0° Frame Angle (If Vehicle Is Higher In The Rear, Add The Frame Angle To The Measured Caster. If Vehicle Is Lower In The Rear, Subtract The Frame Angle From The Measured Caster. Compare The Total Specification.)

[2]: @ Curb Ride Height (Positive Value Is Toe-In, Negative Value Is Toe-Out)

[3]: Maximum (Centerline Of Front Tires Compared To Centerline Of Rear Tires)

[4]: Negative Value Is Counterclockwise.