Crankshaft Main Bearing
| Main Bearing Cap Bolts CAUTION: Seat the main bearings in the saddles prior to bolt tightening. Do not rotate the crankshaft until all main bearing caps are tightened or engine damage may occur. | Stage 1 | Finger-tighten the bolts. |
| Stage 2 | 68-81 Nm (51-59 ft.lb) | |
| Stage 3 | 102-115 Nm (76-84 ft.lb) | |
| Main Bearings | Clearance to Crankshaft - Desired | 0.0008-0.0015 in |
| Clearance to Crankshaft - Allowable | 0.0008-0.0026 in | |
| Bearing Wall Thickness (Std.) | 0.0956-0.0951 in |