Sunroof / Moonroof Module: Testing and Inspection

SUNROOF CONTROL MODULE INSPECTION
1. Remove the headliner.
2. Connect the negative battery cable.

Terminal Voltage List (Reference) - Connector View:

Terminal Voltage List (Reference) - Pinouts (1A - 2D):

Terminal Voltage List (Reference) - Pinouts (2E - 2H):

3. Measure the voltage at the sunroof control module terminals as indicated.
4. Disconnect the sunroof control module connector before checking for continuity at terminal 1A and 2B.
- If not as specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, replace the sunroof control module.