Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Rear Wheel Alignment

TOTAL TOE-IN ADJUSTMENT
1. Remove the access hole caps of the rear crossmember.
2. Loosen the cam nut on the lateral link.

3. Turn the adjusting cam bolt as indicated to adjust the toe-in.

Note: Turning the adjusting cam bolt one graduation changes the toe-in about 2.9 mm (0.11 inch) (0°18').

4. Tighten the cam nut.
Tightening torque 87 - 116 Nm (8.8 - 11.9 kgf-m, 63.7 - 86.0 ft. lbs.)
5. Install the caps.