Crankshaft, Engine
| Bearing Journal | Diameter | 2.2059-2.2051 Inch (in) | |
| Out-of-Round Limit | 0.0006 Inch (in) | ||
| Taper Limit | 0.0006 Inch (in) Per Inch | ||
| Journal Runout Limit | 0.002 Inch (in) | ||
| Surface Finish (RMS) | 10 | ||
| Runout Service Limit | 0.005 Inch (in) | ||
| Thrust Bearing Journal Length | 1.201-1.199 Inch (in) | ||
| Connecting Rod Journal | Diameter | 2.0464-2.0472 Inch (in) | |
| Out-of-Round Limit | 0.0006 Inch (in) | ||
| Taper Limit | 0.0005 Inch (in) Per inch | ||
| Surface Limit (RMS) | 10 | ||
| Main Bearing Thrust Face | Surface Finish (RMS) | Front | 35 |
| Rear | 25 | ||
| Runout Limit | 0.001 Inch (in) | ||
| Main Bearings | Clearance to Crankshaft | Desired | 0.0008-0.0015 Inch (in) |
| Allowable | 0.0008-0.0026 Inch (in) | ||
| Bearing Wall Thickness | 0.0956-0.0951 Inch (in) | ||
| Connecting Main Bearing Cap Bolts | Stage 1 | Finger Tighten | |
| Stage 2 | 51-59 Foot Pound-Force (ft.lb) | ||
| Stage 3 | 76-84 Foot Pound-Force (ft.lb) | ||
| Cylinder Head Bolts | Stage 1 | 52 Foot Pound-Force (ft.lb) | |
| Stage 2 | 52 Foot Pound-Force (ft.lb) | ||
| Stage 3 | 90-100 Degrees |