Connecting Rod Bearing
| Bearings Clearance to Crankshaft | Desired | 0.0008-0.0015 Inch (in) |
| Allowable | 0.0008-0.0026 Inch (in) | |
| Bearing Wall Thickness | 0.0619-0.0624 Inch (in) | |
| Piston Pin Bore Diameter | 0.9096-0.09112 Inch (in) | |
| Crankshaft Bearing Bore Diameter | 2.1720-2.1728 Inch (in) | |
| Out-of-Round Limit | 0.0004 Inch (in) | |
| Taper Limit | 0.0004 Inch (in) | |
| Length (Center-to-Center) | 5.4558-5.4591 Inch (in) | |
| Twist | 0.003 Inch (in) | |
| Bend | 0.0015 Inch (in) | |
| Side Clearance (Assembled to Crank) | Standard | 0.0035-0.0115 Inch (in) |
| Service Limit | 0.014 Inch (in) | |
| Connecting Rod Bearing Cap Nuts | Stage 1 | Finger Tight |
| Stage 2 | 26-30 Foot Pound-Force (ft.lb) | |
| Stage 3 | 31-36 Foot Pound-Force (ft.lb) |