Vehicle Speed Sensor: Service and Repair

VEHICLE SPEEDOMETER SENSOR REMOVAL/INSTALLATION (WITHOUT ABS)
1. Disconnect the negative battery cable.
2. Remove the transverse member.
3. Disconnect the vehicle speedometer sensor connector.





4. Remove the vehicle speedometer sensor.
5. Apply ATF to a new O-ring and install it on the vehicle speedometer sensor.
6. Install the vehicle speedometer sensor.
Tightening torque
7.9 - 10.7 Nm (80 - 110 kgf.cm, 69.5 - 95.4 inch lbs.)
7. Connect the vehicle speedometer sensor connector.
8. Install the transverse member.
Tightening torque
94 - 131 Nm (9.5 - 13.4 kgf.m, 68.8 - 96.9 ft. lbs.)
9. Connect the negative battery cable.