Attachment I

CONDITION OF CONCERN

On all vehicles, the brake system does not meet the brake stopping distance with partial failure requirement of Federal Motor Vehicle Safety Standard (FMVSS) No. 135, which states that the stopping distance from a 100km/h (62 mph) test speed should be below 168 m (551 ft.) This safety standard establishes a minimum stopping distance for vehicles that have experienced a partial failure of the braking system. If a partial failure occurred in the braking system, the stopping distance of the vehicle could increase, increasing the risk of an accident.





SUBJECT VEHICLES

OWNER NOTIFICATION





Mazda will notify customers by first class mail in three phases during January 2002, as shown.





PARTS INFORMATION

The quantity shipped to each dealer will be based on the number of vehicles registered in each dealers area. To order additional repair kits, obtain the VIN and contact the Dealer Assistance Group.

Campaign labels are supplied at no charge and are available in 8-1/2" X 11" sheets containing 18 labels. Please use MNET for ordering additional labels.





WARRANTY CLAIM PROCESSING INFORMATION

Note:
Reimbursement for brake fluid can be claimed using part number 5555-BK-001, quantity 1.

REPAIR PROCEDURES

Please refer to Attachment II.