Crankshaft Gear/Sprocket
Torque| Crankshaft Pulley Lock Bolt Torque : | Tighten in Four Steps : |
| Step 1 : Tighten to 120Nm. (88.5ft-lbs.) | |
| Step 2 : Loosen 360 deg. (One full turn) | |
| Step 3 : Tighten to 47-53Nm. (35-39ft-lbs.) | |
| Step 4 : Tighten 85-95 deg. |
| Crankshaft Pulley Bolt Torque : | Tighten Bolt In Four Steps : |
| 1.) Tighten To 120Nm. (89ft-lbs.) | |
| 2.) Loosen One Full Turn (360 degrees) | |
| 3.) Tighten To 50Nm. (37ft-lbs.) | |
| 4.) Tighten To 90Nm. (66ft-lbs.) |