Overdrive Switch: Service and Repair

O/D OFF SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the steering wheel.
3. Remove the column cover.
4. Remove the combination switch.
5. Disconnect the connector.
6. Remove the selector lever component.
7. Install the selector lever component.
Tightening torque
7.9 - 10.7 Nm (80 - 110 kgf.cm, 69.5 - 95.4 inch lbs.)
8. Connect the connector.
9. Install the combination switch.
10. Install the column cover.
11. Install the steering wheel.
12. Connect the negative battery cable.