Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2000 >> MPV ES V6-2.5L DOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Speed Sensor: Testing and Inspection

INPUT/TURBINE SPEED SENSOR INSPECTION
1. Disconnect the negative battery cable.
2. Remove the air cleaner component.
3. Disconnect the input/turbine speed sensor connector.





4. Measure resistance between the terminals of the input/turbine speed sensor.
- If not as specified, replace the input/turbine speed sensor.
Resistance (ATF temperature: -40 - 160° C (-40 - 320° F)) 253 - 604 ohms
5. Connect the input/turbine speed sensor connector.
6. Install the air cleaner component, fresh-air duct, and resonance chamber.
7. Connect the negative battery cable.
pro multis · About Operation CHARM