Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2000 >> Millenia V6-2.5L DOHC >> Repair and Diagnosis >> Brakes and Traction Control >> Service Precautions
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brakes and Traction Control: Service Precautions

WHEELS AND TIRES REMOVAL/INSTALLATION
1. The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, tighten it to 89 - 127 Nm (9.0 - 13.0 kgf-m, 66 - 94 ft. lbs.).

BRAKE LINES DISCONNECTION/CONNECTION

Caution Brake fluid will damage painted surfaces. If brake fluid does get on a painted surface, wipe it off immediately.

1. Tighten the brake pipe flare nut using the Special Service Tool (SST) (49 0259 770B). Be sure to modify the brake pipe flare nut tightening torque to allow for use of a torque wrench-SST combination.
^ If any brake line has been disconnected anytime during the procedure, add brake fluid, bleed the brakes, and inspect for leakage after the procedure has been completed.

CONNECTORS DISCONNECTION/CONNECTION
1. Disconnect the negative battery cable before doing any work that requires handling of connectors. Reconnect the negative battery cable only after the work is completed.

ABS/TCS COMPONENTS REMOVAL/INSTALLATION
1. Make sure that there are no Diagnostic Trouble Codes (DTCs) in the ABS/TCS memory after working on ABS/TCS components.
^ If there are any DTCs in the memory, clear them.

pro multis · About Operation CHARM