Keyless Entry Module: Testing and Inspection

KEYLESS CONTROL MODULE INSPECTION

1. Remove the rear seat back.

Terminal Voltage Table (Reference) - Connector View:

Terminal Voltage Table (Reference) - Pinouts (A - F):

2. Measure the voltage at the keyless control module terminals using a voltmeter.
3. Disconnect the keyless control module connector and check for continuity at terminal B.
- If not as specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, perform the symptom troubleshooting.