Cruise Control Module: Testing and Inspection

Terminal Voltage List (Reference) - Connector View:

Terminal Voltage List (Reference) - Pinouts (A - C):

Terminal Voltage List (Reference) - Pinouts (D - H):

Terminal Voltage List (Reference) - Pinouts (I - T):

1. Measure the voltage at the cruise control module terminals as indicated.
2. Disconnect the cruise control module connector before inspecting continuity at terminal T.
- If not as specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, replace the cruise control module.