Wheel Alignment Pre-Inspection
WHEEL ALIGNMENT PRE-INSPECTION1. Inspect the tire inflation, and adjust to the recommended pressure as necessary.
2. Inspect the front wheel bearing play. Replace bearings as necessary.
3. Inspect the wheel and tire runouts.
4. Inspect the ball joints and steering linkage for excessive looseness.
5. Place the vehicle on level ground with no luggage or passenger load.
6. The difference in height between the left and right sides from the center of the wheel to the fender brim must not exceed specification.
Specification
10 mm (0.39 inch)
7. Shake the vehicle to settle the suspension.