Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2000 >> Millennium Edition V6-2.3L DOHC (Miller cycle) >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair

1. Disconnect the negative battery cable.
2. Remove the rear console box, center panel, and undercover. (See DASHBOARD AND CONSOLE REMOVAL/INSTALLATION.)




3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.

Connector Removal Note
1. Remove the rear heater duct fasteners.

NOTE: Separating the duct may cause deformation to it. However, this will not affect the performance of the duct.




2. Separate the rear heater duct to both sides.
3. Disconnect the PCM connector.

Connector Installation Note
1. Connect the PCM connector.
2. Install the rear heater duct.
3. Verify that the rear heater duct is correctly joined, and install the rear heater duct fasteners.
pro multis · About Operation CHARM