Component Tests and General Diagnostics

KEYLESS CONTROL MODULE INSPECTION
1. Remove the rear package trim.

Terminal Voltage List (Reference) - Connector View:

Terminal Voltage List (Reference) - Pinouts (A - D):

Terminal Voltage List (Reference) - Pinouts (E - N):

Terminal Voltage List (Reference) - Pinouts (O - P):

2. Measure the voltage at the keyless control module terminals as indicated.
3. Disconnect the keyless control module connector before inspecting for continuity at terminals C and L.
- If not as specified, inspect the parts listed under "Action" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, perform the keyless entry system symptom troubleshooting.