Power Door Lock Control Module: Testing and Inspection

NOTE: Disconnect the door lock control module 1 connector before checking for continuity at terminal F.

Terminal Pinouts:

Terminal A - D:

Terminal E - H:

1. Measure the voltage at the door lock control module 1 terminals as indicated below.
- If not as specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, replace the door lock control module 1.

NOTE: Disconnect the door lock control module 2 connector before checking for continuity at terminal F.

Terminal Voltage List:

1. Measure the voltage at the door lock control module 2 terminals as indicated below.
- If not as specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, replace the door lock control module 2.