Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2001 >> 626 ES V6-2.5L DOHC >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Air Bag Control Module >> Service and Repair >> Deployment Authorization Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Deployment Authorization Procedure

AIR BAG MODULES DEPLOYMENT AUTHORIZATION PROCEDURES
1. Install a new SAS control module. Turn the ignition switch to ON and verify that the air bag system warning light illuminates for approximately 6 seconds, goes out, and then flashes continuously.
- If the air bag system warning light does not flash continuously and indicates a diagnostic trouble code, inspect the system using the on-board diagnostic. (See FOREWORD.) When the malfunctions have been repaired and the air bag system warning light flashes continuously, go to step 2.

2. If the air bag system warning light flashes continuously, turn the ignition switch to LOCK and back to ON after more than approximately 1 second.
3. Verify that the air bag system warning light illuminates for approximately 6 seconds and then goes off.
- If the light stays on, perform the deployment authorization procedure again.
pro multis · About Operation CHARM