Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2001 >> B2500 SX Regular Cab 2WD L4-2.5L VIN C >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo Cable >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Servo Cable: Service and Repair

CRUISE CONTROL ACTUATOR CABLE REMOVAL / INSTALLATION

1. Remove the accelerator control splash shield.




2. Remove the cruise control actuator cable bolt (2.5L and 3.0L).




3. Remove the cruise control actuator cable clip.




4. Separate the actuator cable from the throttle body linkage.




5. Remove the cable from the servo.
1. Push the locking arm on the cruise control cable cap then rotate the cap counterclockwise.




6. Remove the cruise control cable.
1. Depress the spring retainer.
2. Slide the core wire end out of the cruise control servo pulley and remove the cruise control cable.

NOTE: Make sure the rubber seal is fully seated onto the cruise control cable cap.

7. To install, reverse the removal procedure.
pro multis · About Operation CHARM