Power Outside Mirror Glass

OUTSIDE MIRROR GLASS REMOVAL




1. Warm the frame and the mirror glass to approximately 70 °C {158 °F} for 3 minutes using a hot air blower.
2. Put on gloves and protective eye wear.
3. Insert a tape-wrapped scraper between the mirror glass and the frame, and pry the glass loose.

OUTSIDE MIRROR GLASS INSTALLATION




1. Clean and degrease the adhesion surface of the mirror glass.
2. Stick double-sided adhesive tape onto the back side of the mirror glass.
3. Warm up the frame using a hot air blower.
4. Remove the paper backing from the double-sided adhesive tape on the back side of the mirror glass.
5. Insert the mirror glass into the frame, then press lightly on the glass to secure it.