Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2001 >> MX-5 Miata L4-1.8L DOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair >> Deployment Authorization Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Deployment Authorization Procedure

AIR BAG MODULE AND PRE-TENSIONER SEAT BELT DEPLOYMENT AUTHORIZATION PROCEDURES

1. After installing a new SAS control module, verify that the air bag system warning light flashes continuously approximately 6 seconds after the ignition switch is turned to ON position.
- If a diagnostic trouble code is indicated, perform the appropriate AIR BAG SYSTEM ON-BOARD DIAGNOSTIC.

2. Turn the ignition switch to LOCK position then back to ON position while the air bag system warning light is flashing continuously.
- If the procedures have been performed correctly, the air bag system warning light illuminates, then goes off after approximately 6 seconds.
- If it does not go off, perform the deployment authorization procedure again.
pro multis · About Operation CHARM