Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2001 >> MX-5 Miata LS L4-1.8L DOHC >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Installation

CLIMATE CONTROL UNIT

REMOVAL

1. Disconnect the negative battery cable.
2. Disconnect the air intake wire from the blower unit.
3. Disconnect the air mix wire and airflow mode wire from the heater unit.




4. Remove the hole covers by inserting a small, tape-wrapped, flathead screwdriver into the slot, then carefully prying them off without scratching the center panel. Pry up and pull off the hole covers carefully to prevent the posts from breaking off.




5. With the beveled parts of the SST (Removing Tool) facing inward, insert them into the climate control unit.
6. Pull the SST (Removing Tool) outward and rearward to slide out the climate control unit.
7. Disconnect the climate control unit connectors.

INSTALLATION




1. Pass each wire through the following routes, then connect them to each unit.
2. Connect the climate control unit connectors.




3. Insert the climate control unit until each clip clicks.
4. Install the hole covers carefully to prevent the posts from breaking off.
5. Adjust the climate control unit wire.
6. Connect the negative battery cable.
pro multis · About Operation CHARM