Power Outside Mirror Glass
REMOVALWithout Heated Outside Mirror
1. Warm the frame and the mirror glass using a hot air blower.
2. Put on gloves and protective eye wear.
3. Insert a tape-wrapped scraper between the mirror glass and the frame, and pry the glass loose.
4. Remove the remaining adhesive from the mirror glass and the frame.
With Heated Outside Mirror
1. Warm the frame and the mirror glass using a hot air blower.
2. Put on gloves and protective eye wear.
3. Insert a tape-wrapped scraper between the mirror glass and the mirror body, and pry the glass loose.
4. Remove the remaining adhesive from the mirror glass and the mirror body.
5. Remove the center screw and washer.
6. Pull the mirror body out as straight as possible. Do not pull the harness.
7. Pull out the heated outside mirror connector, and peel back the surrounding tape. Disconnect the connector.
INSTALLATION
Without Heated Outside Mirror
1. Stick double-sided adhesive tape onto the back side of the mirror glass.
2. Warm the adhesive surface of the frame using a hot air blower.
- If the frame is stained with oil, degrease it.
3. Install the glass in the mirror frame and gently press it in to secure it.
With Heated Outside Mirror
1. Reconnect the heated outside mirror connector and wrap it in tape.
2. Secure the connector in back of the case.
- If the connector is not put in back of the case, the connector will prevent the mirror body from moving.
3. Verify that there is enough grease in parts A and B.
- If necessary, apply more grease.
4. Align the mirror body with the power unit guide, and press in the mirror body.
5. Apply grease to the washer, and install the washer and the screw. Remove any grease that may be on the surface of the mirror body.
6. Stick double-sided adhesive tape onto the back of the mirror glass.
7. Warm the adhesive surface of the mirror body using a hot air blower.
8. Install the glass to the mirror body and gently press in the glass to secure it.