Using SST (WDS or Equivalent)

PCM INSPECTION

CAUTION: The PCM terminal voltages vary with change in measuring conditions and vehicle conditions. Always carry out a total inspection of the Input systems, output systems, and PCM to determine the cause of trouble. Otherwise, a wrong diagnosis will be made.

PCM Inspection Using the SST (WDS or equivalent)

NOTE:
- PIDs for the following parts are not available on this model. Go to the appropriate part inspection.
- CMP sensor
- Main relay

1. Connect the WDS or equivalent to the DLC-2.
2. Turn the ignition switch on.
3. Measure the value.
- If value is not within the specification, follow the instruction in Action column.

PID/DATA Monitor Table (Reference) - (Part 1):

PID/DATA Monitor Table (Reference) - (Part 2):

PID/DATA Monitor Table (Reference) - (Part 3):

PID/DATA Monitor Table (Reference) - (Part 4):

PID/DATA Monitor Table (Reference) - (Part 5):

PID/DATA MONITOR table (Reference)