Transmission Position Sensor/Switch: Testing and Inspection

TRANSAXLE RANGE (TR) SWITCH INSPECTION
Inspection of Operation
1. Verify that the starter operates only with the IG SW at the START position and the selector lever in P and N positions.
^ If not as specified, inspect for continuity at the TR switch.
2. Verify that the back-up lights illuminate when shifted to R position with the ignition switch at the ON position.
^ If not as specified, inspect for continuity at the TR switch.

Inspection of Continuity










1. Inspect for continuity at the TR switch.

^ If not as specified, replace or adjust the TR switch.