Removal and Installation

REAR DOOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. To remove the checker, turn the door screen over.




3. Remove in the order indicated below.
1. Connector
2. Checker pin
3. Rear door hinge
4. Rear door
5. Checker

4. Install in the reverse order of removal.
5. Adjust the rear door.

Connector Removal Note




1. Pull the pin outward.
2. Disconnect the connector.

Connector Installation Note
1. Push the pin in.
2. Connect the connector.
3. Push the pin in again.