Steering: Service Precautions

Wheels and Tires Removal/Installation
1. The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, retighten it to 89 - 117 Nm (9.0 - 12.0 kgf-m, 65.1 - 86.7 ft. lbs.).

Power Steering Components Removal/Installation
1. If any power steering fluid line has been disconnected anytime during the procedure, add ATF M-III or equivalent (e.g. Dexron(R)III), bleed the fluid lines, and inspect for leakage after the procedure has been completed.

Connectors Disconnection/Connection
1. Disconnect the negative battery cable before doing any work that requires handling of connectors. Reconnect the negative battery cable only after the work is completed.