Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Idle Speed: Testing and Inspection

ENGINE TUNE-UP [FS]
Engine Tune-up Preparation
1. Warm up the engine to normal operating temperature.
2. Shift the transaxle into neutral.
3. Turn off all electrical loads.
- Headlight switch
- Fan switch
- Rear window defroster switch
- A/C switch
4. Verify that the steering wheel is at straight ahead position.





5. Connect the SSTs (WDS or equivalent) to the - DLC-2.
6. Access RPM PID.
7. Wait until the electrical fan stops.

Idle-up Speed Inspection
1. Perform "Engine Tune-up Preparation".
2. Connect the SST (System selector) to the DLC.
3. Set switch A to position 1.
4. Set the test switch to SELF TEST.
5. Verify that the idle speed is normal.
6. Verify that the RPM PID is within the specification.
- If not as specified with all load conditions, inspect the IAC valve.
- If not as specified with some load condition, inspect the related input switches, harnesses, and connectors.





Specification
*1 Excludes temporary idle speed drop just after the electrical loads (E/L) are turned on.
*2 Headlight is on, Fan switch is above 1st, Cooling fan is operating, Rear window defroster is on.
*3 Steering wheel is fully turned.
*4 A/C switch and fan switch are on.