Cruise Control Module: Testing and Inspection

1. Remove the passenger-side front side trim.
2. Remove the cruise control module without disconnecting the connector.

Terminal Voltage List (Reference):

Terminal Voltage List (Reference) - Terminals (A - C):

Terminal Voltage List (Reference) - Terminals (D - M):

Terminal Voltage List (Reference) - Terminals (N - P):

3. Measure the voltage at the cruise control module terminals as indicated.
4. Disconnect the cruise control module connector before inspecting for continuity at terminal P.
- If not as specified, inspect the parts listed under "Action."
- If the parts and wiring harnesses are okay but the system still does not work properly, replace the cruise control module.