Shift Cable: Adjustments

SELECTOR LEVER CABLE ADJUSTMENT





1. Remove the upper steering column shroud





2. Remove the lower steering column shroud.
1 Remove the screws.





3. Position a 0.6mm (0.023 inch) feeler gauge between the gearshift lever selector and the gearshift lever detent.
4. Place the gearshift lever in the DRIVE position and hang a 1.4 kg (3 lbs.) weight from the gearshift lever.





5. Loosen the gearshift cable adjuster to adjust the cable then tighten.





6. Install the lower steering column shroud.
1 Position the lower steering column shroud.
2 Install the screws.





7. Install the upper steering column shroud.