Connecting Rod
| Connecting Rod | Piston Pin Bore Diameter | 21.017 - 21.031 Millimeter (mm) |
| Bearing Bore Diameter | 53.015 - 53.035 Millimeter (mm) | |
| Length | 138.06 - 138.14 Millimeter (mm) | |
| Twist Alignment (bore to bore max difference) Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline. | 0.050 Millimeter (mm) Per 25 | |
| Bend | 0.038 Per 25 | |
| Side Clearance | 0.100 - 0.30 Millimeter (mm) | |
| 0.35 Millimeter (mm) Max. | ||
| Clearance to Crankshaft | 0.028 - 0.066 Millimeter (mm) | |
| Pin to Rod Clearance | Standard | 0.004 - 0.020 Millimeter (mm) |
| Service Limit | 0.035 Millimeter (mm) |