Window Regulator: Service and Repair
All vehicles1. Remove the front door trim panel.
2. Remove the screw and the front door trim panel bracket.
3. Position the water shield aside.
4. Lower the front door window glass to gain access to the screws.
5. Remove the front door window glass screws.
6. Support the front door window glass in the full up position.
Vehicles with power windows
7. Disconnect the front door power window regulator motor electrical connector.
8. Remove the front door power window regulator assembly.
1. Remove the bolts.
2. Remove the nuts.
Vehicles with manual windows
9. Remove the front door window regulator assembly.
1. Remove the bolts
2. Remove the nuts.
All vehicles
10. To install, reverse the removal procedure.
1. Cycle the door window glass to make sure of correct door window glass engagement.