Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2002 >> 626 ES V6-2.5L DOHC >> Repair and Diagnosis >> Brakes and Traction Control >> Service Precautions
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brakes and Traction Control: Service Precautions

Wheels and Tires Removal/Installation
^ The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, retighten it to 89 - 117 Nm (9 - 12 kgf-m, 66 - 86 ft. lbs.).

Brake Lines Disconnection/Connection

Caution:
^ Brake fluid will damage painted surfaces. If brake fluid gets on a painted surface, wipe It off immediately.

^ Tighten the brake pipe flare nut by using the SST (49 0259 77OB). Be sure to modify the brake pipe flare nut tightening torque to allow for use of a torque wrench-SST combination.
^ If any brake line has been disconnected anytime during the procedure, add brake fluid, bleed the brakes, and inspect for leakage after the procedure has been completed.

Connectors Disconnection
^ Disconnect the negative battery cable before doing any work that requires handling of connectors. Connect the negative battery cable only after the work is completed.

ABS/TCS Components Operations
^ Make sure that there are no diagnostic trouble codes in the ABS/TCS memory after working on ABS/TCS components. If there are any codes in the memory, erase them.
pro multis · About Operation CHARM