Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2002 >> 626 LX V6-2.5L DOHC >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Testing and Inspection >> EGR System Repair Verification Drive Mode
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EGR System Repair Verification Drive Mode

EGR System Repair Verification Drive Mode






NOTE:
- The IAT PID must be above 10 °C {50 °F} to initiate the EGR monitor.
- After the monitoring conditions are set, system testing requires at least 30 seconds to complete.

1. Connect WDS or equivalent to DLC.
2. Warm vehicle up to at least an engine coolant temperature (ECT PID) of 74 °C {165 °F}.
3. Verify all accessory loads (A/C, P/S, headlight, blower fan) are off.
4. Drive vehicle within 77 - 204 km/h {48 - 127 mph} and maintain a constant speed for at least 2 minutes.
5. Return to idle for at least 20 seconds.
6. Stop vehicle and access to On-Board System Readiness Test Function (MODE01) to check the drive mode completion status.
- If not completed, turn the ignition key to off then repeat Steps 3 to 6 at least one more time.

7. Access to Diagnostic Monitoring Test Results Function (MODE06) to check the values. If values are not within specification, repair has not completed.
8. Verify no DTCs are available.
pro multis · About Operation CHARM