Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Combination Light

FRONT COMBINATION LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.




2. Remove in the order indicated below.
1. Fastener
2. Front combination light
(See Front Combination Light Removal Note)
3. Connector
4. Socket
5. Front turn light/side marker light bulb

3. Install in the reverse order of removal.

Front Combination Light Removal Note

CAUTION: To prevent the front combination light and bumper from being scratched, attach protective tape to the metal ruler and the bumper.




1. Insert a 15 mm {0.59 in} maximum width metal ruler into the end of the front combination light approximately 75 - 80 mm {3.0 - 3.1 in}. Rotate the metal ruler towards the front of the vehicle and remove the front combination light.