Torque Reduction Inhibit Signal
Inspection Using An Oscilloscope (Reference)
Torque reduction inhibit signal
- PCM terminal: 20 (+) - 103 (-)
- Oscilloscope setting: 1 V/DIV (Y), 10 ms/DIV (X), DC range
- Vehicle condition: idle after warm up
Torque reduction inhibit signal
- PCM terminal: 20 (+) - 103 (-)
- Oscilloscope setting: 1 V/DIV (Y), 10 ms/DIV (X), DC range
- Vehicle condition: idle after warm up