Cylinder Head Assembly (I)

CYLINDER HEAD ASSEMBLY (I)





1 of 2





2 of 2

1. Assemble in the order indicated in the table.

Valve Seal Assembly Note





1 of 2





2 of 2

Note: The intake and exhaust valve seals are different as shown.





1. Assemble the SSTs so that depth L is as specified.
Depth L 19.9 mm (0.783 inch)
2. Press the valve seal onto the valve guide by hand.





3. Tap the SSTs using a plastic hammer until its lower end touches the cylinder head.

Valve Spring Assembly Note





1. Install the valve spring with the closer pitch toward the cylinder head.

Valve Keeper Assembly Note





1. Install the valve keeper using the SSTs.