Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2002 >> MX-5 Miata LS L4-1.8L DOHC >> Repair and Diagnosis >> Heating and Air Conditioning >> Refrigerant Pressure Sensor / Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Refrigerant Pressure Sensor / Switch: Service and Repair

REFRIGERANT PRESSURE SWITCH REMOVAL/INSTALLATION

1. Discharge the refrigerant from the system. (See REFRIGERANT CHARGING.)
2. Disconnect the negative battery cable.

CAUTION: If moisture or foreign material enters the refrigeration cycle, cooling ability will be lowered and abnormal noise will occur. Always immediately plug all open fittings after removing any refrigeration cycle parts to keep moisture or foreign material out of the cycle.




3. Remove the refrigerant pressure switch.
4. Install in the reverse order of removal.
5. Perform the refrigerant system performance test. (See REFRIGERANT SYSTEM PERFORMANCE TEST.)

Refrigerant Pressure Switch Installation Note

1. Apply compressor oil to the O-ring and connect the joint.

pro multis · About Operation CHARM