Instrument Panel, Gauges and Warning Indicators: Service and Repair

Removal and Installation

1. Disconnect the battery ground cable.




2. Lower the glove compartment.
1. Press the glove compartment release tabs inward while pulling downward on the glove compartment.




3. Disconnect the climate control cable.
1. Position the locator pin.
2. Release the locking tab.
3. Disconnect the climate control cable from the blend door shaft.




4. Remove the instrument cluster finish panel.
1. Remove the screws.
2. Remove the instrument cluster finish panel.
3. Disconnect the electrical connectors.

5. To install, reverse the removal procedure.