Operation CHARM: Car repair manuals for everyone.

Engine Mounting AJ without Variable Valve Timing

ENGINE MOUNTING





1. Install the SST (engine hanger) to the cylinder block holes as indicated in the figure, and tighten the SSTs (bolts).
2. Mount the engine on the SST (engine stand).
3. Drain the engine oil into a container.
4. Clean the flange surface (seal rubber) of the drain plug, then install the plug.

Tightening torque
22-30 N-m (2.2-3.1 kgf-m, 16-22 ft-lbf)